English
Overview products < Manifold units < Matrix manifold

Matrix manifold

For many years the S+J matrix manifold has set a standard for manifold units in piggable areas. It consists of two intersecting pipeline areas. Here the full system area is permanently filled with product and in most cases connected to tanks. The second area consists of piggable lines in which products are often changed and which typically are connected to blending, process or filling stations. These lines can be opened to each full system line (tank). In this second area pipelines with sizes of DN 50 up to DN 100 can be used in a single valve. The manifold can be built in sizes from one full system connection to one pipeline (a simple T-port valve) up to a size of as large as 50 full system connections to 20 pigging lines (this means 1000 possible connections).

Operation can be done manually or automatic. The pipelines are stand-alone ones and can be operated parallely to each other.
  • Closed and piggable to one side
  • Compact overall size
  • No hoses or couplings: Maximum safety and prevention from leakages and accidents
  • For pipelines with DN 50, 80 and 100 in one manifold
  • Integrated pig catcher unit
  • Few movable components – minimal maintenance
  • Automatic or manual operation
  • Piggable from and to connections
  • Modular design for easy extension
  • Cost-effective
  • Self-locking on loss of control air and/or voltage
The full system part consists of non-piggable, stabilised ducts which take over the product feed. Rectangular to these ducts the piggable pipelines are installed. Both are interconnected to each other with a ring valve design at the intersection. This ring valve opens the connection from the product feed duct to the piggable part of the manifold and at the same time serves as pig catcher. The respective ring valves are opened by a manual or pneumatic actuation unit. A slide drives the actuation unit parallely above the piggable line to the desired product feed full system part. Therefore just one actuation unit per piggable line is needed. Cost-intensive interlocking devices and control units are thus reduced. The small locking unit allows for a very compact design and needs extremely low maintenance. The matrix manifold is ideal for pipelines leading to and from tank farms, reaction containers and blenders.

This manifold can be equipped with following options:

  • Heating
  • Bottom drainage of the full system area, for frequent change of product
  • Adjustment of mounting possibility to local situation, such as vertical, horizontal or wall mounting
  • Manual or automatic operation
 
The manifold shown here connects 16 full system lines to 18 pigging lines. The manifold can be installed vertically. The full system pipes are completely emptied into the pigging line after each pigging sequence.
One full system pipe with six pigging lines to one filling machine.
With this additive manifold 14 additive components are concentrated to 2 working sections, here installed in a skid.
One automated manifold with 10 full system connections to 5 pigging lines (can be upgraded to 7 pigging lines).
About S+J Products Service News Contact Imprint